StarTech.com RACKCONS1916 Bedienerhandbuch

Manual Revision: 04/17/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual73. From the rear of the cabinet, slide the KVM console onto the mounting rails.4. Install one screw on each side of the console (

Instruction Manual8Connecting computers to the moduleAttach each of your managed computers to your StarView KVM console’s PC ports using ultra-thin KV

Instruction Manual9Turning on the consoleMake sure the power cord and all cables are connected properly. Grasp the handle of the drawer, pull the pan

Instruction Manual10Testing the console1. To test that the console is working properly, perform the following steps:2. Power up the LCD Rack drawer,

Instruction Manual11Input Source1. Press the Menu button.2. Use the Down and Up buttons to scroll.3. Press the Menu button to enter, and you will s

Instruction Manual12Color - Cont’dPosition1. Press the Menu button.2. Use the Down and Up buttons to scroll.3. Highlight Position and press the Men

Instruction Manual13Recall1. Press the Menu button.2. Use the Down and Up buttons to scroll to Recall. Press the Menu button to enter, where you wil

Instruction Manual14A triangle mark (p) to the right of a name indicates the port is cascaded to a Slave; the number at the left of the triangle mark

Instruction Manual15Selecting Computers for AutoscanFunction key <F2> - Use this key to switch the eye mark (N) of a computer on or o. First, u

Instruction Manual16Auto ScanIn this mode, the Console automatically switches from one powered computer to the next, sequentially in a xed interval.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction Manual17Scan TypeReady PC + N: In Scan mode, scan through power-on and eye mark selected computers.Ready PC: In Scan mode, scan through po

Instruction Manual18Hot-key commandsA Hot-key command is a short keyboard sequence used to select a computer, to activate computer scan, etc. The Con

Instruction Manual19Hot-key commands - cont’dCOMMANDHOTKEY SEQUENCEDESCRIPTIONSelect computerLeft Ctrl + Left Ctrl + xSelects the computer connected

Instruction Manual20Manual ScanLeft Ctrl + Left Ctrl + F2Use the up and down arrow keys to scroll to the previous or next computer in the sequence. Pr

Instruction Manual21SpecicationsConnectors1 x PS/2 Keyboard 6-pin Mini-Din (Female)1 x PS/2 Mouse 6-pin Mini-Din (Female)1 x VGA female output connec

Instruction Manual22Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Instruction Manual1IntroductionThank you for purchasing a StarTech.com LCD Rack Console with KVM. This product combines an LCD Console with 17” monito

Instruction Manual2Keys (2) Screw KitMounting Brackets (2)Side Rails with Front and Rear Brackets (2)Installation and UsageModule - Rear PanelModule -

Instruction Manual3Console - Front View (open)Mounting the Console1. Loosen the rear screws (pre-installed in side rails) and adjust the length of

Instruction Manual43. Tighten the screws that were loosened in Step 1:4. Install the remaining rail, repeating Steps 1-3.5. Slide the Module onto t

Instruction Manual51. Install three screws on each side of the console:2. Installation is now complete:

Instruction Manual6Connecting the Console/ModuleTo connect the KVM Console/Module to a computer, perform the following steps:1. Remove the four screw