StarTech.com USB2G4LEXT2 Bedienerhandbuch

Manual Revision: 02/06/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7Direct ConnectInstalling the USB2G4LEXT2 as Direct ConnectRequirementsTo complete the installation, you will also require the follo

Instruction Manual8Connecting the Local Extender to the Remote ExtenderWith Surface Cabling1. Connect the Cat 5e or better cable into the Link port o

Instruction Manual9With Wall Network Ports1. Connect a Cat 5e or better cable (not provided) into the RJ45 wall outlet near the host computer.2. Con

Instruction Manual10Verifying Installation1. On the Local and Remote Extender, check that the Power, Status, Link and Host LEDs are on. Note: For d

Instruction Manual113. Mac OS: Open the System Proler to conrm that the USB2G4LEXT2 has installed correctly. In the left hand column under Hardwar

Instruction Manual12CompatibilityThe USB2G4LEXT2 complies with USB 1.1 and USB 2.0 specications. However, there is no guarantee that all USB devices

Instruction Manual13Link LEDs are blinking.• There is no connection between the Local and Remote Extenders.• Units may not be paired to each other.•

Instruction Manual14My USB device does not work properly.• Insucient bandwidth is available on the network to support the device.1. Connect the Loc

Instruction Manual15SpecicationsCabling Cat 5e UTP or betterPorts 4Local Unit Connectors1 x RJ-45 Female1 x USB B (4 pin) FemaleRemote Unit Connector

Instruction Manual16Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Instruction Manual1IntroductionPackaging Contents• 1 x USB 2.0 Extender Local Unit• 1 x USB 2.0 Extender Remote Unit• 1 x USB A-B Cable• 1 x Unive

Instruction Manual2Rear ViewProduct OverviewThe Local ExtenderThe Local Extender connects to the computer using a standard USB 2.0 cable. Power for th

Instruction Manual3The Remote ExtenderThe Remote Extender provides USB Type A ports for standard USB devices, and allows you to connect up to four US

Instruction Manual4InstallationNote: Units will be pre-paired with each other out of the box. If they are not paired, follow the instructions provided

Instruction Manual5Note: Some networks may be congured to block devices with unfamiliar MAC addresses. If this is the case, you will need to provide

Instruction Manual6Installing the Remote Extender1. Connect a Cat 5e (or better) cable (not provided) into a network switch or wall network port conn