StarTech.com UNIDOCK3U Bedienerhandbuch PDF herunterladen (Seite 7)

Instruction Manual

7. Connect the included USB cable from the hard drive dock to an available USB port

on the computer system. The computer can be on or o.

NOTE: The USB 3.0 cable can be connected to a USB 2.0 port, however will only be able

to operate at USB 2.0 speeds.

8. Press the power button on the front of the dock. Button 1 is for the SATA drive, and

button 2 is for the IDE drive.

9. The SATA drive bay has an ejection button next to it, that can be pressed to help

pull the drive free from the bay. NOTE: Drives should be powered o before being

removed from the dock.

Driver Installation

No driver installation is required for the supported operating systems, as this hard

drive dock is natively supported, so the drivers are already installed.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

StarTech.com UNIDOCK3U Bedienerhandbuch Seite 7