StarTech.com SATDUP11IMG Bedienerhandbuch PDF herunterladen (Seite 6)

Instruction Manual

2. Connect your Source drive to the SATA SSD/HDD Source Port on the SATDUP11IMG.

Note: The Source Drive can be a drive you intend to make an exact copy of, or an

Image drive containing several hard drive images.

a) If the source drive is a SATA HDD/SSD, use the included Short SATA cable or

the included Long SATA cable if the drive is installed into a PC chassis.

b) If your source drive is an eSATA HDD/SSD Enclosure or Dock, use the

included eSATA + 12V Power Cable or eSATA+5V Power Cable depending

on your drive requirements.

3. Connect your Target drive to the SATA SSD/HDD Target Port on the SATDUP11IMG.

Note: The Target Drive can be a drive you intend to overwrite with another drive

image, or an Image drive you intend to add an additional drive image to.

a) If the target drive is a SATA HDD/SSD, use the included Short SATA cable or

the included Long SATA cable if the drive installed into a PC Chassis.

b) If your target drive is an eSATA HDD/SSD Enclosure or Dock, use the included

eSATA + 12V Power Cable or eSATA+5V Power Cable depending on your

drive requirements.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

StarTech.com SATDUP11IMG Bedienerhandbuch Seite 6