StarTech.com PCI300WN2X2 Bedienerhandbuch PDF herunterladen (Seite 14)

Instruction Manual

Manually Creating a Prole

If the network you want the computer to connect to is currently not available (o site),

or otherwise not listed as an available network (no SSID broadcast), a prole for the

network can be manually created. You must know the name of the network (SSID), the

type of encryption and any passwords/passphrases required to connect to the network

prior to creating a prole. Multiple proles can be created, if you regularly connect to

dierent wireless networks in dierent locations.

1. From the main utility window, click on the “Prole” button.

2. In the Prole window, click on the “Add” button. This will expand the bottom section

of the main utility window.

3. Enter in a name for this prole, then enter the name of the network you wish to

connect to in the “SSID” eld. Click the “Auth/Encry.” button above the Prole Name

eld when ready.

4. Select the type of Authentication/Encryption used by the network (if any). Enter in

the password/passphrase in the elds below.

5. Click the “OK” button once all settings have been entered.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

StarTech.com PCI300WN2X2 Bedienerhandbuch Seite 14