StarTech.com PEX10000SFP Bedienerhandbuch PDF herunterladen (Seite 6)

Instruction Manual

Note: This card will work in PCI Express slots of additional lanes (i.e. x8, or x16 slots).

4. Gently insert the card into the open PCI Express slot and fasten the bracket to the

rear of the case.

Note: If installing the card into a small form-factor/low-prole desktop system,

replacing the pre-installed standard-prole bracket with the included low-prole (half-

height) installation bracket may be necessary.

5. Place the cover back onto the computer case.

6. Insert the 10G SFP+ transceiver module of your choice, compatible to your network,

into the SFP+ slot on the card.

7. Insert the power cable into the socket on the power supply and reconnect all other

connectors removed in Step 1.

Note: The 10G ber card is compatible with 10G SFP+ transceiver modules only.

Driver Installation

Windows®

1. Upon starting Windows, if the Found New Hardware dialog appears on the screen,

cancel/close the window.

2. Download the latest drivers from the www.startech.com website (recommended),

applicable to the Operating System on the host computer that you are installing the

card to, or insert the provided Driver CD into your computers DVD/CD drive.

3. From the main desktop or start menu, right-click on Computer, then selecting

Manage. In the Computer Management window, select Device Manager from the

left window panel. (Windows 8.1 users can right-click on the Start button and click

Device Manager)

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Keine Kommentare

StarTech.com PEX10000SFP Bedienerhandbuch Seite 6