StarTech.com PEX1000MMSC2 Bedienerhandbuch

Manual Revision: 07/25/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual73. Under the Network Adapters category should be a “Realtek PCIe GBE Family Controller” device. “Right-click” on the device and s

Instruction Manual8

Instruction Manual9Software Utility The PCI Express Fiber Gigabit Ethernet Adapter also includes an optional monitoring and maintenance software utili

Instruction Manual101. Remove the protective covers from the PCI Express Fiber Gigabit Ethernet Adapter’s connector.2. Prepare a network cable with

Instruction Manual11LEDsLEDs Status IndicationLNK (Link)(Green)Steady A valid network connection established.O No network connection.ACT (Activity)(Y

Instruction Manual12SpecicationsBus Type PCI ExpressCard Prole Standard Prole (LP bracket incl.)Chipset ID Realtek - RTL8168E; Marvell - 88E1111B1I

Instruction Manual13Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Instruction Manual1IntroductionPackaging Contents• 1x 1 Port PCI Express Gigabit Fiber Network Card• 1x Low Prole Bracket• 1x Driver CD • 1x Inst

Instruction Manual2Product OverviewCardJumperFiber Optic SC FemaleLink LEDActivity LEDJP2 Jumper

Instruction Manual3Note: See the “Card to Card Direct Conguration” section on the following pages for further detials on jumper conguration.JP2 Jump

Instruction Manual44. Gently insert the card into the open PCI Express slot and fasten the bracket to the rear of the case. NOTE: If installing the

Instruction Manual54. If AutoPlay is disabled, browse to your CD/DVD drive, open the “PEX1000MMSC2_SFP2_Driver” folder, and run the “Setup.exe” appli

Instruction Manual6Mac OS 1. Insert the provided CD into your DVD/CD-ROM drive.2. For OS 10.7 and up, browse to the “\PEX1000MMSC2_SFP2_Driver\MacOS