StarTech.com RACKCOND1701 Bedienerhandbuch PDF herunterladen (Seite 7)

Please note: You can only connect to a computer using either the PS/2 or USB port not both

simultaneously.

Connecting to a USB Controlled Computer

Connect the standard VGA cable and a USB A-B cable to the computer and KVM Module as shown

below. The computer can be a USB-ready PC, Sun, HP server, or a Mac.

Connecting to a PS/2 Controlled Computer

Connect the standard VGA cable and two mini-DIN6 male-to-male cables to the computer and KVM

Module as shown below. There are two mini-DIN6 female connectors marked with keyboard and

mouse, be sure not to swap the connections.

Connecting to a KVM Switch

When cascading with a KVM switch, KVM Module can be used to control up to 16 computers. The

connection is exactly the same as is shown above (see Connecting to a USB Controlled Computer, or

Connecting to a PS/2 Controlled Computer). The only difference is the connection would be made to

the “CONSOLE PORT” (could be “PS/2” or “USB” interface) of the KVM switch instead, of a computer.

Please choose either PS/2 or USB to connect, prior to turning on your computer!

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

StarTech.com RACKCOND1701 Bedienerhandbuch Seite 7