StarTech.com NETRS2321P Bedienerhandbuch

Manual Revision: 07/09/2013For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual6Web Console OperationEnter the IP address you have set for the NETRS2321P device into your web browser address bar (default IP: 10.

Instruction Manual7System IPOn this page, you can adjust the NETRS2321P network conguration. If set to DHCP mode, all other settings will be ignored,

Instruction Manual8Load default settingOn this page, you can load and store the factory default settings into EEPROM.NOTE: Network settings and MAC ad

Instruction Manual9TCP ModeNOTE: When TCP mode is set to Server or Client mode, the UDP mode will be disabled automatically. When UDP mode is enabled,

Instruction Manual10Reverse TelnetReverse Telnet works the same as Telnet Server mode. The Telnet port is listens for a connection after booting up. I

Instruction Manual11UDP ModeWhen UDP mode is enabled, TCP mode will be disabled automatically. In UDP mode, the Local Port will be assigned to this de

Instruction Manual12UARTUART or Universal Asynchronous Receiver Transmitter refers to the ‘RS-232 serial port’ of the NETRS2321P. All of the port sett

Instruction Manual13Hardware Flow ControlSet the ow control mode of UART interface as enabled or as none.UART Memory Overow countShows the number of

Instruction Manual14Virtual COM Software OperationThe Virtual Com application lets you install and congure your NETRS2321P easily over the network. F

Instruction Manual15COM MappingTo map a virtual COM port, select COM Mapping from the left pane of the VCOM application, then click AddClick OK to cre

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction Manual16Set the device to be a Telnet Client. In the case the Ethernet connected device is the Telnet server or other NETRS2321P in server

Instruction Manual17Product ApplicationsUDPTCPTCP Server Mode

Instruction Manual18SpecicationsConnectors1x DB-9 (9-pin; D-Sub) Male 1x RJ-45 FemaleSerial Protocol RS-232Maximum Baud Rate 230400Data Bits 5,6,7,8F

Instruction Manual19Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualiTable of ContentsProduct Overview ...1DIN Rail Mount

Instruction ManualiiProduct Applications ...17UDP ...

Instruction Manual1Product OverviewTop ViewFront ViewRear ViewDIN rail screw holeWall-mount screw holeRS-232 DB9 male serial portDC JackLoad Default/R

Instruction Manual2DIN Rail MountingAttach the included DIN Rail brackets (one per side) using the provided screws to the top DIN Rail screw hole (mar

Instruction Manual3Pin1 TX+2 TX-3 RX+6 RX-RJ45 Ethernet Pin AssignmentsRS-232 DB9 Male Pin AssignmentNOTE: This serial device server performs as a DTE

Instruction Manual4IntroductionPackaging Contents• 1 x Serial over IP Device Server • 1 x Universal Power Adapter (NA/UK/EU) • 1 x Software CD • 1

Instruction Manual5Broadcast SearchThe Broadcast Search function is used to locate all NETRS2321P devices that are connected to the same LAN as your c