StarTech.com NETRS2321P Bedienerhandbuch PDF herunterladen (Seite 19)

Instruction Manual

COM Mapping

To map a virtual COM port, select COM Mapping from the left pane of the VCOM

application, then click Add

Click OK to create the COM Mapping

TCP/UDP

Depending on the protocol you are using, the options below will enable/disable

automatically as applicable.

Server/Client (TCP Mode only)

Set the device to be a Telnet Server. In server mode, the Telnet port listens and waits

for a host or other client to make a connection. In this case the Ethernet connected

device is the client.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

StarTech.com NETRS2321P Bedienerhandbuch Seite 19