StarTech.com AP150WN1X1OG Bedienungsanleitung PDF herunterladen (Seite 8)

Instruction Manual

Indicator State Description

PWR

ON The device is powered on

O The device is powered o

Wi activity

Flashing Data is being transmitted / received over wireless

O No link detected

PoE

ON Link detected

O No link detected

Flashing

Data is being transmitted / received on the PoE LAN

interface

LAN

ON Link detected

O No link detected

Flashing

Data is being transmitted / received on the Secondary

LAN interface

LED Indicators

Installation

Preparing Your Site

1. Determine the location for the included PoE injector and mount using the

appropriate screws/anchors for the material you are mounting to (not included).

2. Determine the location for the Wireless AP. If you are pole-mounting the AP, use

the included clamp to secure the device. If you are wall mounting the AP, use the

appropriate screws/anchors for the material you are mounting to (not included).

3. Prepare/purchase the required length of Ethernet cabling to go from the PoE

Injector to your LAN Switch or router, and from PoE Injector to the AP.

Note: The total length of Ethernet cabling from the Wireless AP to your LAN switch or

router should not exceed 100m.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

Keine Kommentare

StarTech.com AP150WN1X1OG Bedienungsanleitung Seite 8