StarTech.com RACKCONS2001 Bedienerhandbuch PDF herunterladen (Seite 5)

Mounting the console

1. Adjust the sliding rail until the screw underneath is visible. Loosen

(do not release) the two rear screws then adjust the rear bracket to

ﬁt the depth of your rack:

2. Install the rail into the rack by attaching them to the front/rear posts

using the appropriate screws and nuts for your rack (not included):

3. Tighten the rear screws that were loosened in Step 1:

4. Install the remaining rail, by repeating Steps 1-3.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Keine Kommentare

StarTech.com RACKCONS2001 Bedienerhandbuch Seite 5