StarTech.com RACKCONS2001 Bedienerhandbuch PDF herunterladen (Seite 7)

8. Installation is now complete.

How to Use

Connecting the Console

To connect the LCD console to a computer, perform the following steps:

1. Turn off your computer.

2. Connect the VGA or DVI video cable from the VGA/DVI output on

the computer system to the VGA or DVI port on the rear of the rack

console. Only connect one or the other, not both.

3. Set the USB-PS/2 switch on the console to either USB or PS/2

mode, depending on which you wish to use to connect the computer.

4. Connect either the USB or PS/2 connector on the rear of the rack

console to a USB or PS/2 port on the computer system.

5. For audio, connect a 3.5mm audio cable to the Line In connector

on the console to the Line Out on the computer or external KVM

(available separately, such as StarTech.com ID: SV831DUSBAU).

6. Connect the power adapter and power cord to the power connector

on the console. Connect the remaining end of the power cord to an

available power outlet.

DVI connector

USB

connector

PS/2

connector

VGA

connector

3.5mm mini-jack

Audio In

Power

connector

USB-PS/2 switch

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Keine Kommentare

StarTech.com RACKCONS2001 Bedienerhandbuch Seite 7